Bombardier Traxter Hitch mount ?

[GuglioLS]

Hi mtbrbike and a warm welcome to TBN.

Thanks for your interest in the hitch. Sorry to say they are no longer in production. I made the last one back in May of 2013. If you have someone local with a CNC plasma cutter and welding capabilities, I will supply the DXF files to cut out the basic parts.

I no longer have access to a decent CNC plasma cutter. The owner of the shop that has the CNC plasma cutter I used to use let it go to waste. Basically it wore out and they wont spend any money getting it re-worked.

Best regards,

Larry G

 

[Mart2024]

This is more like it and what I should have done in the first place. The capacity of the tongue weight has got to be equal to or greater than the towing capacity. This thing is bullet proof now.



I'm happy the way it came out, it fits like a glove, all 10 mounting holes (5 on each side) line up perfectly with the OEM axle / differential bolts. If it didn't take me so long to make this darn thing I'd sell them for a living

Larry

Hi there, can you tell me where you get this?

Thanks!!!!

 

[Tforte]

Took some measurements, drew up some fancy curved and angled parts in AutoCAD, then burned the parts out of 3/16" plate on a CNC plasma cutter. Made a couple of bends in the press and viola.....







Larry

Is this available for purchase? I have an 04 Bombardier Traxter

 

[Tforte]

are these for sale or can you make me one - I have the Bombardier Traxter Quest 04