Boomer 1030 and Danuser G20/40 PHD

[Scaper]

I attempted to attach the Danuser G20/40 to my Boomer 1030 today and the top link end of the boom is to long, it pushes the yoke towards the rear, off verticle about 8" to 10". Even if I could get it hooked up the yoke would rotate towards the rear when I tried to lift the auger. I am waiting for a call from Glen Danuser to see if the boom can be shortened enough to correct the yoke back to a verticle position without disrupting the workings of the auger. Has anyone attempted to shorten a top link end on a phd boom before? I'm thinking about a Pat's quick change system that would give me another 3.5" at the 3ph lower ball ends rearward. Have any answers or thoughts please respond. I know I can get a unit from Everything Attachements that will work with my tractor(PHD) but it's not a Danuser by far. Scaper

 

[DDT]

sounds like your drive line is tooo long to me

 

[bullbreaker]

Mark you got a great unit at a great price can you please post some pics.

Thanks ! :thumbsup:

Boone