tld
Silver Member
What is a decent box blade for a JD 4110. Book says the width is 50".
Box Blade for JD 4110
- Thread starter tld
- Start date
- Views: 1253
-
- Tags
- john deere 4110
Gary_in_Indiana
Elite Member
- Joined
- Apr 22, 2002
- Messages
- 3,373
- Location
- Fort Wayne, IN
- Tractor
- John Deere 4200 MFWD HST w/ JD 420 FEL w/ 61" loader bucket & toothbar & JD 37 BH w/ 12" bucket
I have a First Choice 60" box blade for my JD 4200 (26HP and 20 PTO HP) and am very happy with the combination. Here is a . I'd really suggest you look at what size box blade JD recommends and then look at what First Choice has to offer. Here is a <A target="_blank" HREF=http://www.firstchoiceequipment.net/> link to the First Choice website if you'd care to check them out.
Good luck with whatever you decide. I hope this helps. /w3tcompact/icons/smile.gif
Good luck with whatever you decide. I hope this helps. /w3tcompact/icons/smile.gif
jyoutz
Super Member
I have a Landpride 54" that I use on my 4100. In my opinion, this is the perfect size for this machine. The 48" blades don't stick out far enough on the sides of the rear wheels, and the 60" box just seems a little too large for this machine
