fountain42
Member
- Joined
- Apr 3, 2008
- Messages
- 45
How big of a Box Blade will my 2520 handle 5 or 6?
Grading Box Blade
- Thread starter fountain42
- Start date
- Views: 1257
prosperity
Platinum Member
I have a 5' and I think it fits the machine perfectly.
It covers my tracks, and I don't want an earth engaging implement to be much bigger than that.
It covers my tracks, and I don't want an earth engaging implement to be much bigger than that.
kennyd
Advertiser
Yup, stick with a 5' unless you are only going to use it in sand.
Houndsman
Member
Fountain42,
I have a BB2060 for my 2520. I use it to do a lot of tasks. When scarifying or moving a lot of dirt, the tractor can reach a culminating point where the differential lock may or may not make the difference. You'll want to purchase a 60in instead of a 72in.
You may have a task in mind, right now, for your BB. A BB has an infinite number of uses that you can search for on this site, and those uses may not be in your mind right now---- but you will limit your own future capabilities if you buy "too big". Go w/ the 60in.
v/r mark
I have a BB2060 for my 2520. I use it to do a lot of tasks. When scarifying or moving a lot of dirt, the tractor can reach a culminating point where the differential lock may or may not make the difference. You'll want to purchase a 60in instead of a 72in.
You may have a task in mind, right now, for your BB. A BB has an infinite number of uses that you can search for on this site, and those uses may not be in your mind right now---- but you will limit your own future capabilities if you buy "too big". Go w/ the 60in.
v/r mark
