ARNAUDVILLE
Member
where do the swing chains go on a bran son 4720h tractor. they broke off and I cant see where they were
3-Point Hitch branson 4720h tractor
- Thread starter ARNAUDVILLE
- Start date
- Views: 980
-
- Tags
- branson 4720h
Cougsfan
Veteran Member
- Joined
- Sep 10, 2008
- Messages
- 1,568
- Location
- Eastern Washington State
- Tractor
- Ferguson TO35, Branson 4720CH
I am not sure what you are talking about? Could you elaborate a bit more?
OP
ARNAUDVILLE
Member
ITS THE CHAINS THAT KEEP YOUR EQUIPMENT FROM SWINGING .I THINK THEY HOLD THE 2 SWAY BARS AT THE BOTTOM OF THE 3 POINT HITCH.
Cougsfan
Veteran Member
- Joined
- Sep 10, 2008
- Messages
- 1,568
- Location
- Eastern Washington State
- Tractor
- Ferguson TO35, Branson 4720CH
Hmmm. My 4720ch doesn't use chains. It uses one piece of square tubing placed inside a larger piece of square tubing with a series of holes and a pin that let you telescope it's length to limit the horizontal swing of the sway bars. Much simpler, easier to use, and more effective than the chains that are on my old Massey. I'm surprised that your 4720h uses chains. Do you want a picture of mine?
