Branson electrical

[3510probee]

I have a 3510i that was running and just shutoff. The tractor was idling and I was not on it. I was setting a fence pull post that the tractor was holding up.
So I am sure I did not pull something loose. When I got back on to start it back up, there were no lights at all. The glow plug lights, the two light below that, nothing came on. The tractor would turn over (not start) and the hazard lights will come on but nothing else.

I checked all the little fuses and they are all ok. I believe I have either a bad relay or a major fuse blown somewhere. Can someone call my cell and help me out with what to look for.

 

[Zork]

Try checking to see if your fuel cut off solenoid clicks when you turn on the key and, provide a cell phone #. I feel bad for you because 103 people have read your post and I'm sure one would have contacted you hours after posting this. Good luck.

 

[MicroPilot]

I would second checking the fuel cut off solenoid.