Broken already!

[arizona98tj]

There are three screws that attach the mechanical part of gauge to printed circuit board, all three of mine were loose... No gauge reading, little short stubby phillips screwdriver snugged them up all is good....

My 4 year old MF 1529's temp gauge became intermittent about two weeks ago and stopped showing anything several days ago. I pulled the dash cover today and tightened the screws on the back of both the temp gauge (they were not very tight). I also checked the fuel gauge and snugged those screws too since they felt about the same.

After starting it up, I had normal temperature readings within a few minutes. Thanks!