Has anybody had any experience with using bucket forks? I have a Kubota 7510 and want to get a set of bucket forks for it. I am a little concerned about bending the forks. I have been told by one vender that he unloads trucks with pallets of post hole diggers and has no problems.
Forks Bucket forks
- Thread starter Clyde1
- Start date
- Views: 1051
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
Plenty of people have. Clamp on bucket forks are a common attachment for small CUTs. Your loader is capable of lifting around 700 lbs at the bucket, much less hanging out at 36" though.
Any of the commercially available forks will work fine. If you have welding skills I offer a free set of plans to build your own. Just PM me with your real email address.
To get additional information do an advanced search for bucket forks. You will get hundreds of threads that talk about bucket forks.
Any of the commercially available forks will work fine. If you have welding skills I offer a free set of plans to build your own. Just PM me with your real email address.
To get additional information do an advanced search for bucket forks. You will get hundreds of threads that talk about bucket forks.
