unclesonny
New member
- Joined
- Apr 26, 2010
- Messages
- 1
Hello All,
New to this site and surprised that even one exits for tractors..
Perhaps someone here can give us some idea's on what our problem is..
Here are some of the spec's that I pulled off the plates attached to the unit..
Massey Ferguson Model: MF-50, Serial No. CGM- 515290
Motor - Z134 Serial No. 685560 Continental Motor, I guess....
The 3 point hitch works okay when lever is pulled out, except it is a little jerky, but does lift fairly quickly..
When lever is pushed back in, for the front end loader bucket operation, the bucket barely goes up.. It can't lift any weight at all, but will very slowly work it's way up to it's full lift...
I was wondering if this unit might have a filter type screen which may be plugging up, etc....
If someone may need more spec's on this unit, I can check the tags again if this will help...
Thanks for any help out there..
Regards, John
New to this site and surprised that even one exits for tractors..
Perhaps someone here can give us some idea's on what our problem is..
Here are some of the spec's that I pulled off the plates attached to the unit..
Massey Ferguson Model: MF-50, Serial No. CGM- 515290
Motor - Z134 Serial No. 685560 Continental Motor, I guess....
The 3 point hitch works okay when lever is pulled out, except it is a little jerky, but does lift fairly quickly..
When lever is pushed back in, for the front end loader bucket operation, the bucket barely goes up.. It can't lift any weight at all, but will very slowly work it's way up to it's full lift...
I was wondering if this unit might have a filter type screen which may be plugging up, etc....
If someone may need more spec's on this unit, I can check the tags again if this will help...
Thanks for any help out there..
Regards, John