bui

bui

New member
Joined
Mar 30, 2015
Messages
2
Location
Pinson, TN
Tractor
150
I have a 150 Massey Ferguson with Delco 4 wire with Borg Warner 4 terminal regulator which has two wire round resistors on bottom of regulator. I have had it wired for 20 years and it worked great, but I have had some strokes and can't remember how to rewire it. Does anyone have a wiring diagram for this. I know that #4 post goes to fuel gauge and F goes to F on alternator. There is a R on the alternator and the external post is the output from the Alternator through the amp gauge to the negative side of battery I think. I just can't remember the middle two wires on the regulator. I assume the R on the alternator plug is the exciter wire. Which wires goes to the middle two terminals? Thanks for any help.
 

Marketplace Items

2020 CATERPILLAR 279D3 SKID STEER (A62129)
2020 CATERPILLAR...
UNUSED JCT 72" HYD TILLER (A62131)
UNUSED JCT 72" HYD...
(2) UNUSED 14.9-24 TIRES W/6 LUG RIMS (A62130)
(2) UNUSED 14.9-24...
2025 Hydraulic Brush Cutter Mini Skid Steer Attachment (A61567)
2025 Hydraulic...
2017 Load Trail 22ft. 7 Ton T/A Equipment Tilt Trailer (A61568)
2017 Load Trail...
Single Cylinder Hydraulic Grapple Bucket Skid Steer Attachment (A61567)
Single Cylinder...
 
Top