bdhsfz6
Elite Member
- Joined
- Apr 11, 2015
- Messages
- 3,574
- Location
- Northeastern Pennsylvania
- Tractor
- Kubota MX5800 HST & L6060 HSTC Formerly L6060 HST B7100 HST, L2550, L3010 HST, L3430 HST
I could never get more than a year out of a 55 gal drum burn barrel before it rusted to pieces. Out of frustration, I cut the top off a 120 gal propane tank. That was over 20 years ago and I'm still burning trash in it today.
If you attempt this, DO IT SAFELY!! I removed the valve and filled the tank with water. I drilled 4 half inch holes and used a cordless Sawzall to make the cut. It took awhile to torch vent holes in the 3/16" thick steel sides. I thought about cutting slots as mentioned above to create the vortex effect but the holes seem to work ok.
The tank works very well as a burn barrel since it has a raised pedestal which keeps the hot metal from igniting dried grass.
If you attempt this, DO IT SAFELY!! I removed the valve and filled the tank with water. I drilled 4 half inch holes and used a cordless Sawzall to make the cut. It took awhile to torch vent holes in the 3/16" thick steel sides. I thought about cutting slots as mentioned above to create the vortex effect but the holes seem to work ok.
The tank works very well as a burn barrel since it has a raised pedestal which keeps the hot metal from igniting dried grass.
