bush hog 1846qt fel

[sacsr]

do you know which yanmar this fel will fit?

anybody have any experience with them?

I am looking at a 187d, 1401d or 1510d and wondered if it would fit any of these?

thanks,

scott

 

[Ron67]

Don't know anything about the attachments, but I'm getting some interesting feedback on the 1510D. You might consider reading my few posts. I'll let you know what I decide. I really want a tractor but don't want a big red birdbath!

 

[sacsr]

I have been reading the threads. Like these guys, the welded fel bothered me....my first thoughts is what else has been done that way.....

The 1510d is a good tractor from all I have read. And it fits into the size I am looking for. The power shift is a nice extra on these.

The 187d looks to be close to the same. I am thinking it may be slightly bigger and longer like the 1500.....still in the game but now at 1600 lbs getting a bit heavy and a bit long for my current trailer....

The 1401d is my other choice but you lose the power shift.......

Best thing is to find one in good shape that has been taken care of by PO.

Good news is that more seem to pop up for sale every day and the guys on this forum are a wealth of knowledge. I am much better prepared today than I was a week ago....still learning...but at least learning what to look for and what to ask....kudo's for all the good advice!!

Good luck!

 

[Smoody]

do you know which yanmar this fel will fit?

anybody have any experience with them?

I am looking at a 187d, 1401d or 1510d and wondered if it would fit any of these?

thanks,

scott

bushhogs website has the info you request.

 

[tsmithco]

I installed one on my ym2002. Works good - little slow on dumping, but haven't had any issues. Took about 2 days to install. Had a mounting kit for my ym2002, but had to make some minor adjustments... Some bolts were too long for the holes in my bell housing, and had to add some spacers here and there... Didn't have to do any major mods like grinding or welding or cutting.

Let me know if you want to know anything else about it!

 

[sacsr]

Thanks....went to look at it and it was in really rough shape. Decided to keep looking.

 

[Smoody]

sacsr, you mind letting me know where its at? i am looking for a loader and I see you are in NC, i am just below you in SC.