BX 25

[benitez]

Looking for work lights for my new Kubota BX 25. Anyone have any ideas or suggestions?

 

[Shutesbury]

Start here - http://www.tractorbynet.com/forums/...ew-led-lighting-half-price.html?highlight=LED

then you can read this also - http://www.tractorbynet.com/forums/...ew-led-lighting-half-price.html?highlight=LED

With the similar limitations on excess capacity of your BX25 and my BX24, I'd suggest the LED choices. People have been advocating 27 watt floods, but I have a pair of 18 watt units, and they turn night into day. Mounted on the protected underside of my ROPS, they have been great - no blinding, no head bumping...
Paul

 

[Shutesbury]

Benitez,

Search 'all' for lighting and related wording and you'll find a ton of info and opinions. Broaden your browsing beyond Kubota Lawn and Garden, and as a BX owner, you'll find a lot of good tips in the full 'tractor' categories. I think this area tends to focus more on ZTR mowers and such... good info, as well, but your BX has capabilities far beyond that.

And welcome to TBN!

;-) Paul

 

[pedalstomper78]

Some good information in the above threads. I've ordered two lights from tractorhelp.com and have had great luck with them. Got the 27w round ones in a flood patter. Lots of light and they seem to have a pretty low amperage draw.

 

[BXpanded]

Here you go.. Quick-On Work Light Kit
Lots of goodies for that BX25

 

[LBrown59]

Looking for work lights for my new Kubota BX 25. Anyone have any ideas or suggestions?

Your post does not belong in this forum becaus a BX is not a lawn and garden tractor.
Post it in the owning & operating forum an you may get better/more results.
Also do a search on L brown 59 as i posted a very detaild description about installing work lights on any /all tractors . :thumbsup:

 

[LBrown59]

Looking for work lights for my new Kubota BX 25. Anyone have any ideas or suggestions?

Your post does not belong in this forum becaus a BX is not a lawn and garden tractor.
Post it in the owning & operating forum an you may get better/more results.
Also do a search on LBrown59 as I posted a very detaild description about installing work lights on any /all tractors . :thumbsup:

 

[JOHNTHOMAS]

Your post does not belong in this forum becaus a BX is not a lawn and garden tractor.
Post it in the owning & operating forum an you may get better/more results.
Also do a search on LBrown59 as I posted a very detaild description about installing work lights on any /all tractors . :thumbsup:

LB you know you are not supposed to be over here in Lawn and Garden since you don't have Lawn and Garden equipment. Get back over to the tractors and leave these guys alone!!!:cool2: And since you don't belong over here your not allowed to post anything over here.:laughing: Now....GO ON....Get back home and leave them alone since YOU AIN'T nobodys boss!!!!!:drink: And then you had the nerve to try and give them advise when you ain't even supposed to be over here!!! Do you police all of the forums on TBN????

 

[radioman]

it all depends on how handy, the looks you want, how much work you want to do, or money you got.

kidding aside - I just used a piece of a bed frame and cut to length of my rops. I mounted 2 forwards lights and one reverse on the angle iron. soldered all the wiring together and ran a line to the fuse box with a switch. Mounted on bottom part of my rops with couple square corners u clamps from TSC.

 

[4kbota]

check with your local dealer. i know that kubota has came out with a factory work light kit to fit the new bx25d im sure it will work on your tractor. just a thought hope it helps.