BX big player in high back chair repair

[tractorgp]

The chair was blown over by high winds a few weeks ago. The 4x4 legs were broken off at ground level so I made splints to join on new leg lengths. I also installed a ground anchor to prevent future wind damage. The structural improvements and anchor were supposed to be done long ago but just got around to it.

 

[GolfAddict]

I sure enjoy your videos. Great editing, fast forwarding at the right times, lots of view angles... you must incorporate some video from that security camera up on the pole you've shown us. Thanks for sharing the links of your videos with us! :thumbsup:

So, are we going to see what looks like a second half of the project just starting at the end of this vid?

 

[tractorgp]

I sure enjoy your videos. Great editing, fast forwarding at the right times, lots of view angles... you must incorporate some video from that security camera up on the pole you've shown us. Thanks for sharing the links of your videos with us! :thumbsup:

So, are we going to see what looks like a second half of the project just starting at the end of this vid?

Thanks I've been picking up solar panels over the last last while as they go on sale and it struck me that the back of the chair might just make a pretty good mounting place for a panel or two especially if I use the output to supply electrical power to the adjacent shed. But right now that is just a thought - anyway I need to figure out how to get the sun to shine enough here

 

[dragoneggs]

Nice job gp! These BX's are sure handy and hard workers. You must be a neighbor of 4shorts, eh?

 

[tractorgp]

Nice job gp! These BX's are sure handy and hard workers. You must be a neighbor of 4shorts, eh?

Thanks. Yeah the BX gets a lot of use around here right now I'm considering getting the bh off and the snowblower back on. 4shorts place is about an hour's drive from here.