Hi everyone. Has anyone used a Drawbar with their BX2200? How do I lower my three point hitch to the height that I need for my trailer, but not lower the MMM mount hardware?
thank you
For the mmm mark sure its all the way up and turn the knob under/infront of your seat and it will stay at the "top" position. As far as the draw bar be carefull it will spin the locking clips that fit on other tractors don't work on ours. Many of the gents on here have made there own and one of the threads showed a store bought. Heres a link to the one I put together
3 point hitch/pintal
If you use yours becareful we only have gravity down so your trailer could make the 3pt ride up
Raise the MMM or it's attaching arms and lock them with the lock/height knob just as if the MMM was attached. Real simple. It is covered in the Operator Manual. J