BX2200- FWD Shaft Pin broke

[Jim V]

The rolled pin connecting the front wheel drive shaft (knuckle) to the tranny (at the tranny end, not the front axel end) broke. In which case the shaft slid forward and came to rest on the mower deck. Does not appear to have caused any damage. I assume this pin was held into the knuckle with a twisted wire, but don't know now that this is all missing

Any had this problem before?

Looks like a simple fix, but still under warrenty so will likely have dealer take care of.

 

[Steven]

go to <A target="_blank" HREF=http://tractorsmart.com/PartsBooksKubota/PartsPageForm.htm>http://tractorsmart.com/PartsBooksKubota/PartsPageForm.htm</A> and down load the parts manuals for your bx2200 and any attachments you may have loader, mmm, ect. It looks like a spring pin part # 05411-00650

 

[TomPh]

JimV

I had the very same thing happen to my BX2200 at about 125 hours. Looked like the pin backed part way out and sheared off.

TomPH