BX2200 Starter

   / BX2200 Starter #1  

Ibjimmy

New member
Joined
Jun 19, 2009
Messages
4
Location
Birmingham, AL
Tractor
Kubota BX2200
I took my starter off to have rebuilt but when I went to put it back on (weeks later) I cant remember where the white wire (the one that comes apart in the middle) connects back to? If I hook it up on the post with the 2 red wires the tractor starts fine, but wont shut off, if I put it on the ground bolt (where it just does reach to and looks like it belongs) the tractor turns over but wont start? I dont know if something went wrong with the rebuild or I am missing something? Does anyone have a picture of one that shows all the wires that they can send me? jhamilton@teklinks.com
thanks
 
   / BX2200 Starter #2  
G'day i think the wire you refer to comes from the solenoid and goes to the fuel solenoid kubota use it as a shunt wire to give good voltage while cranking i thought that they were fixed to the solenoid and had a joiner about 2 - 3 inches from the end. Any way you can post photo ?


Jon
 

Tractor & Equipment Auctions

CAT Skid Steer (A50322)
CAT Skid Steer...
2009 Trail King TK110HDG-523 RGN 66 Ton Tri-Axle Lowboy Trailer (A52377)
2009 Trail King...
2015 Peterbilt 320 T/A EZ-Pack Front Loader Garbage Truck (A51692)
2015 Peterbilt 320...
PETERBILT 388 CAB (A53843)
PETERBILT 388 CAB...
Electric Mobility Scooter (A51694)
Electric Mobility...
2007 Amkus Rescue System (A53421)
2007 Amkus Rescue...
 
Top