BX23 Backhoe Flush

   / BX23 Backhoe Flush #1  

tshep

Gold Member
Joined
Jan 12, 2010
Messages
395
Location
Richmond, VA
Tractor
BX23 MLB
Hi all - I did all my fluids last year with major accessories off, and have only mowed and bagged since. It made such a difference in the transmission! Anyway, do not want to contaminate this now fine working assembly! I managed to manually flush the loader before re-attaching it.

How would I flush the backhoe? It doesn't seem quite as simple as the loader was... (power beyond?). if I had to (last resort) I would disconnect each cylinder, but is there a faster or smarter way? If I did cylinders, could I push quick connect valves and wiggle levers to drain hoses, etc - or do I need to do each hose/valve at block?

THX!
 
   / BX23 Backhoe Flush #2  
We have had many people tell us the difference in their tractors after a fresh flush but the easiest is to just run it back in to the system as it isn't that much oil and it would be a pain to undo the fittings or hoses to drain the cylinders and hoses.

It isn't that much oil to mix!
 

Tractor & Equipment Auctions

Ford Super Duty 8ft. Truck Bed (A49346)
Ford Super Duty...
2022 LEGUAN 190 SPIDER LIFT (A51242)
2022 LEGUAN 190...
2016 Toro Groundsmaster 3505D 72in Rotary Mower (A48082)
2016 Toro...
2021 FORD F-150XL CREW CAB TRUCK (A51406)
2021 FORD F-150XL...
2012 SULLIVAN PALATEK AIR COMPRESSOR (A51222)
2012 SULLIVAN...
19009 (A48082)
19009 (A48082)
 
Top