BX23S FEL Cutter blade Option - $120

   / BX23S FEL Cutter blade Option - $120
  • Thread Starter
#11  
I plan on putting a reversable bolt on cutting edge on my BX 25d. I plan on keeping it for a long time and want the regidity, my clamp on forks flex my bucket more than I like. Where did you find one for 120? On amaz on they have a 72" for 129, I can cut it down, but the bolt holes are wider apart than I would like. And it is 5/8" thick. Would rather have 1/2" to save on a little weight.

WORM,
i posted the pictures of the cutter edge in a different thread, but here is the link to it. Take care...!

BX23S - FEL Bucket Cutting Edge

http://www.tractorbynet.com/forums/...x23s-fel-bucket-cutting-edge.html#post4806333
 
   / BX23S FEL Cutter blade Option - $120 #12  
Ok, i`ll have to take another look at it again...old eyes dont see so well anymore.
John, do you have any pics of yours on your BX...?

No longer have a BX.
 
   / BX23S FEL Cutter blade Option - $120
  • Thread Starter
#13  
   / BX23S FEL Cutter blade Option - $120
  • Thread Starter
#14  
Well i tried out that new FEL cutter on my pot hole filled driveway this afternoon, while we had some sunshine. I tipped the bucket forward, little bit of down pressure (just enough to make the frontend/steering light), skimmed the hump out of the middle of the driveway first. Took two passes, hump was GONE...!!! Then skimmed the top of the rest of the driveway, no more potholes. Gawd i love this tractor, as it ran effortless in 2WD and no spinning the rear tires. The backhoe was left on the tractor for added weight & traction. I might have spent about 2hrs doing the worst part of the driveway... including back dragging it with the FEL to smooth out the surface.

The wife is supper happy now. Now she dosent have to crawl thru potholes with her hemi R/T charger. Her car sits low, we were concerned that the front lower spoiler would get torn off the car if we didnt fix the center hump of the driveway... no worries now... she`s happy. Happy wife, happy life...lol.
 
   / BX23S FEL Cutter blade Option - $120 #15  
I put on a WR Long Flat Tooth Bar and get the best of both worlds! I can back drag with it and it increases the usefulness of the bucket 10 times over! Doubles as a wear blade.
 

Tractor & Equipment Auctions

WOODS DHS48N LOT NUMBER 75 (A53084)
WOODS DHS48N LOT...
(1) HD 24ft Free Standing Corral Panel (A51572)
(1) HD 24ft Free...
UNUSED RAYTREE RMBD72S-72" DRUM MULCHER (A51248)
UNUSED RAYTREE...
Halla LF30C 6,500lb LP Forklift (A51691)
Halla LF30C...
JCB 507-42 Telehandler (A51573)
JCB 507-42...
New/Unused 7ft 10 Drawer Stainless Steel Workbench (A51573)
New/Unused 7ft 10...
 
Top