radartech2
New member
- Joined
- Jan 19, 2019
- Messages
- 17
- Tractor
- Kubota L3400
Good evening folks,
I have some questions about this model and through searches it appears a few of you have or had one.
First my neighbor has one, but he got it without the PTO shaft. He told me I could use it all I want, but we need to find a shaft...
As I went looking for one at the usual places I see none appear to have one with the quick release on both ends.
The questions I have are-
1. It appeared that the shaft in the unit was a spline shaft on the BX he has— is that not right? I DIDNT look real close... I should have taken a picture... he is 2 ridges away.
2. I have a kubota L3400– is that big enough to run it?
3. If it needs a special PTO shaft— where do I get it?
4. How small are the “chips”?
5. What would you recommend for a first time user besides RTFM?
Thanks!
I have some questions about this model and through searches it appears a few of you have or had one.
First my neighbor has one, but he got it without the PTO shaft. He told me I could use it all I want, but we need to find a shaft...
As I went looking for one at the usual places I see none appear to have one with the quick release on both ends.
The questions I have are-
1. It appeared that the shaft in the unit was a spline shaft on the BX he has— is that not right? I DIDNT look real close... I should have taken a picture... he is 2 ridges away.
2. I have a kubota L3400– is that big enough to run it?
3. If it needs a special PTO shaft— where do I get it?
4. How small are the “chips”?
5. What would you recommend for a first time user besides RTFM?
Thanks!
