cad cabet 2164 fuel in oil
- Thread starter redlake
- Start date
- Views: 1048
dqdave1
Veteran Member
What motor? If you have a gravity fed carb; the float can stick and fuel will normally drip out of carb; but it could go into crankcase via breather bypas or valve guides.
dqdave1
Veteran Member
What motor? If you have a gravity fed carb; the float can stick and fuel will normally drip out of carb; but it could go into crankcase via breather bypas or valve guides.
Yes, it's probably a worn or sticking carburetor float needle/seat that is flooding the engine internally with gas when it it shut down. This can occur regardless if the fuel is gravity fed or if the engine has a fuel pump. Most modern small engines on LGT's have an electric solenoid at the carb that shuts off the fuel flow to the carb when the ignition is off to prevent this, but I think that's after the time of the 2164.
The flooding gas works its way into the oil just as dqdave1 described.
-Fordlords-
The flooding gas works its way into the oil just as dqdave1 described.
-Fordlords-
Yes, it's probably a worn or sticking carburetor float needle/seat that is flooding the engine internally with gas when it it shut down. This can occur regardless if the fuel is gravity fed or if the engine has a fuel pump. Most modern small engines on LGT's have an electric solenoid at the carb that shuts off the fuel flow to the carb when the ignition is off to prevent this, but I think that's after the time of the 2164.
The flooding gas works its way into the oil just as dqdave1 described.
-Fordlords-
The flooding gas works its way into the oil just as dqdave1 described.
-Fordlords-
