Can I change just the 4100 hydraulic/trans filter?

   / Can I change just the 4100 hydraulic/trans filter? #1  

jimgerken

Veteran Member
Joined
Nov 26, 2001
Messages
1,632
Location
Minnesota
Tractor
John Deere 3720
...not all the oil, just the filter? I just added a valve, a bunch of hose, two new (old) cylinders, etc. I think it'd be a good idea to change the filter after a few more hours of operation, but obviously the oil is still in good shape. What happens if I swap the filter, how much oil comes gushing out there? BTW, this is a HST tractor, in case that matters to the answer. Thanks!
 
   / Can I change just the 4100 hydraulic/trans filter? #2  
I put a big dent in the side of my filter on my 4100 so decided just to change the filter. The oil comes gushing out so it depends on how quick you can get the new filter up there and screwed on. Naturally, when I was trying to hurry and the oil was pouring out I couldn't get the threads to start on the new filter so I ended up loosing most of the oil by the time I got the new one on.
 
   / Can I change just the 4100 hydraulic/trans filter?
  • Thread Starter
#3  
Oh Shucks, I was afraid that was the answer. Thanks for the quick reply, I will think about it a while.
 

Tractor & Equipment Auctions

1995 HESSE CORPORATION BEVERAGE TRAILER (A53843)
1995 HESSE...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
22ft Rollback Flatbed Body with Winch (A54814)
22ft Rollback...
2019 Caterpillar DP35N 7,000lb Diesel Forklift (A54811)
2019 Caterpillar...
2016 INTERNATIONAL 4300 26FT BOX TRUCK (A54607)
2016 INTERNATIONAL...
2015 Ford F550 Bucket Truck - Altec AT40M Boom - Powerstroke Diesel - Automatic Transmission - 4X4 (A53473)
2015 Ford F550...
 
Top