etpm
Veteran Member
- Joined
- Jun 30, 2021
- Messages
- 2,084
- Location
- Whidbey Island, WA
- Tractor
- Yanmar YM2310, Honda H5013, Case 580 CK, Ford 9N
Greetings All,
I have a 1970 something 580 CK. Around the shaft that the steering wheel bolts to oil leaks out profusely. So I need to add power steering fluid after just a few hours using the machine. Looking at my parts book I see that 2 different pumps were used in the steering column. But it looks like if I pull the steering wheel I should be able to pry out the old seal and then drive a new one in. Anybody here have any experience with this?
Thanks,
Eric
I have a 1970 something 580 CK. Around the shaft that the steering wheel bolts to oil leaks out profusely. So I need to add power steering fluid after just a few hours using the machine. Looking at my parts book I see that 2 different pumps were used in the steering column. But it looks like if I pull the steering wheel I should be able to pry out the old seal and then drive a new one in. Anybody here have any experience with this?
Thanks,
Eric