Feb 24, 2013 / Case IH 5240 Maxxum #1 C countryboy2366 New member Joined Feb 24, 2013 Messages 2 Location amherst, wi Tractor none at startup, tractor does not move, turn key off and back on, tractor will move just fine till it sits again... always does it the first time you start it for the day. Any ideas?
at startup, tractor does not move, turn key off and back on, tractor will move just fine till it sits again... always does it the first time you start it for the day. Any ideas?
Feb 26, 2013 / Case IH 5240 Maxxum #2 A art Super Member Joined Apr 10, 2000 Messages 6,798 Location central New York Tractor all makes and models How long of a time sitting? It could be as simple as the two switches on the clutch petal! Last edited: Feb 26, 2013
Feb 26, 2013 / Case IH 5240 Maxxum Thread Starter #3 OP C countryboy2366 New member Joined Feb 24, 2013 Messages 2 Location amherst, wi Tractor none every day, the first time for the day that it is started. fine after that all day long.
Mar 16, 2013 / Case IH 5240 Maxxum #4 M my case ih Bronze Member Joined Mar 14, 2013 Messages 53 Location Ontario Tractor case, farmall massey ferguson we have a 895 case and it is a good tractor 75 hp yes it is small but it dose the job
Mar 16, 2013 / Case IH 5240 Maxxum #5 C cyrush Silver Member Joined Dec 20, 2011 Messages 226 What sort of temperature?? Is it cold, say 0deg F, or was it doing it last summer?? There is a temperature controlled orifice regulated by a wax pellet in the shuttle valve assy!!
What sort of temperature?? Is it cold, say 0deg F, or was it doing it last summer?? There is a temperature controlled orifice regulated by a wax pellet in the shuttle valve assy!!
Mar 17, 2013 / Case IH 5240 Maxxum #6 M my case ih Bronze Member Joined Mar 14, 2013 Messages 53 Location Ontario Tractor case, farmall massey ferguson sraying and in the fall pulling 2 250 bushell v boxs.