CAT 2 to CAT 1 Spring Bushing

   / CAT 2 to CAT 1 Spring Bushing #1  

TwinWillows

Gold Member
Joined
Jan 13, 2005
Messages
437
Location
WKY near Bardwell
Tractor
NH TC40DA
The TNT cylinder that came with my tractor has CAT 2 ends. Since all my implements are CAT 1 I have to use bushings. It seems the bushings were always falling out & rolling into mud puddles or way under the most awkward place. A saw another TBN弾r, I don稚 remember who or I壇 give them credit, list a link to Surplus Center 都pring bushing? Liking the idea of semi permanent bushings I double checked my dimensions and ordered the appropriate spring bushings (BTW they are light & it was cheaper to have them shipped express than their normal shipping).

The bushings are oversized so that when they are installed they are compressed to fit & won稚 fall out. I thought about hammering them in but decided w/my normal luck it壇 slip & flyout only to be lost in the grass or roll under something. So I decided, hey, why not press them in. Not having a press I used a very hi-tech long carriage bolt w/washers on each end. Not more than 5 min later the bushings were in each end of the TNT & have stayed there w/no signs of walking out.

Attached are several photos of the bushings being pressed in.
 

Attachments

  • 070404 IMG_0117 Spring Bushing (600 x 450).jpg
    070404 IMG_0117 Spring Bushing (600 x 450).jpg
    66.4 KB · Views: 288
  • 070404 IMG_0118 Spring Bushing (600 x 450).jpg
    070404 IMG_0118 Spring Bushing (600 x 450).jpg
    68 KB · Views: 217
  • 070404 IMG_0116 Spring Bushing (450 x 600).jpg
    070404 IMG_0116 Spring Bushing (450 x 600).jpg
    68.6 KB · Views: 206

Tractor & Equipment Auctions

2016 KUBOTA SVL95-2S TRACK LOADER (A50854)
2016 KUBOTA...
2013 MACK CXU (A50854)
2013 MACK CXU (A50854)
2008 John Deere 608C combine head (A50657)
2008 John Deere...
STIHL TS420 CUTQUICK SAW (A50854)
STIHL TS420...
74in FEL HD Round Back Bucket (A51039)
74in FEL HD Round...
2016 John Deere 35G Mini Excavator (A49461)
2016 John Deere...
 
Top