changing scarifier tip on woods box blade

[stwyatt]

the teeth on my woods bb600 box blade need to be changed. I found online that you can buy new tips. How do you remove the old ones and install the new ones?

 

[GreatWhitehunter]

With a grinder or other cutting device. When installing the new ones I use a large hammer, punch and torch. It's alot easier to peen them on if there cherry red.

Matt

 

[Johndeere3720]

What I did with my kingkutter box blade was grind off the old welds, pound the teeth off, and drill holes in the shanks and the teeth so they can be bolted on. This makes changing them a LOT easier next time. :thumbsup: I have a picture of it on my rakes in the features page on my website, www.jakesimplements.com

 

[GreatWhitehunter]

In rocky soil the bolts will break off and there goes your tooth too. If the manufactures could get by bolting them they would. :thumbsup:

Matt