CK20HST/CT122 with chipper?
- Thread starter Paystar
- Start date
- Views: 1518
-
- Tags
- bobcat ct122
NVGoat
New member
I have a Bearcat CH5540H 5" Chipper that I primarily use on my DK50. I have run it on the CK27HST which is below the the minimum stated 25 HP at the PTO by 4.5 HP. I was expecting it to not work but it did very well.
You have to feed more slowly but I think the big flywheel in the chipper really offsets the lower HP. I wouldn't recommend running that chipper on the CK20 but a smaller model should work fine if you are close to the recommended HP spec and are reasonable in what you feed into it.
You have to feed more slowly but I think the big flywheel in the chipper really offsets the lower HP. I wouldn't recommend running that chipper on the CK20 but a smaller model should work fine if you are close to the recommended HP spec and are reasonable in what you feed into it.
LaVoie Equipment
Silver Member
Coyote machine
Super Member
- Joined
- May 4, 2009
- Messages
- 7,641
- Location
- Southern VT
- Tractor
- 22 SANY SY 50U, '10 Kioti DK 40se/hst KL-401 FEL, loaded tires, KB-2485 bhoe, Tuffline TB160 BB, Woods QA forks, MIE Hydraulic bhoe thumb & ripper tooth, Igland 4001 winch, & GR-20 Log Grapple. Woods BBX72" Brush Mower. Diamondplate aluminum canopy
FWIW, Dr. Co. makes chippers too, may be better suited to your HP range on your tractor.
Here's a link:DR Power Equipment - PTO / 3 Point Hitch Wood Chipper Models & pricing - manual and elec start chippers
They often have 'trial' periods of up to 1 year so you can try before you own it. Full disclosure: I did get one of their PTO units on the trial program but never actually used it. I decided my $ would go to some other piece of tractor equipment, and returned it to their factory store in VT. I do have other pieces of Dr. equipment and they are adequate for light to medium duty use.
If you plan to chip a forest into mulch then go with something sturdier; but then you're up against HP/output again.
Here's a link:DR Power Equipment - PTO / 3 Point Hitch Wood Chipper Models & pricing - manual and elec start chippers
They often have 'trial' periods of up to 1 year so you can try before you own it. Full disclosure: I did get one of their PTO units on the trial program but never actually used it. I decided my $ would go to some other piece of tractor equipment, and returned it to their factory store in VT. I do have other pieces of Dr. equipment and they are adequate for light to medium duty use.
If you plan to chip a forest into mulch then go with something sturdier; but then you're up against HP/output again.
