CK20HST FEL BH RFM + PHD whooohooo!

[CT_Jeff]

First I have to admit that I have been a "lurker" for a few months now. Reading and reading, some threads have been extremely useful and others entertaining. But almost all are worth reading. It has taken me a while to get it, but it arrived today. I will try to post a few photo's of the little fella!

I want to thank all of you who post and reply on this discussion board. You probably don't know just how helpful you are. I will try to post in the future, when I have useful info or entertaining items to post.

Of course I also want to thank my better half!

Here is a picture of it loaded on the trailer, ready for the ride home!

CT_Jeff

 

[CT_Jeff]

Here is a picture from the left front. Wanted to make sure I did this one for Kioti_John. Yep! That's a cup holder!

 

[CT_Jeff]

Here I am beginning the clearing of its new home. With luck, and patience a small workshop will be here one day. I just had to take a few minutes of seat time.

 

[CT_Jeff]

Here is my first dig with the backhoe. Actually it did not take to long to get dangerous with it. This was taking out an old rotted stump. Ripped it right out, did not have to dig around it. How lucky can you get on your first one!

Thanks again for discussion board, and all of posts and replies. I felt that my questions were being asked, and answered without having to ask them.

I will try to participate!

No jokes about the grey (at least there still is some) hair, or the outfit, just got off work to get the tractor, and did not want to waste time getting changed. HA! I'm Lovin it!

 

[cag]

Congratulation Jeff look's like the fun /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gifabout to begin...cag

 

[GerardC]

Congratulations and welcome to the pack! They're impressive little machines aren't they? One thing to remember is you'll have to put on that work face when the wife is watching /forums/images/graemlins/grin.gif. Let them know your having fun and the parties over /forums/images/graemlins/shocked.gif. Good luck and thanks for posting the photos. /forums/images/graemlins/wink.gif

P.S. What size BH bucket is that? Looks like a 16" to me.

 

[JayC]

Congratulations! That is a great looking setup. /forums/images/graemlins/cool.gif

 

[getut]

Great looking setup. RFM is just like mine.

Run, don't walk, immediately to the hardware store and get bolts with nuts to go through the wheel shafts on the finish mower. /forums/images/graemlins/blush.gif

Don't ask how I know.. and quit looking at that big scallop out of my left rear wheel and one shiny new blade. /forums/images/graemlins/blush.gif /forums/images/graemlins/tongue.gif

 

[dieselchaser]

Looks like a blast! I can hardly wait. I am this close to completeing a deal for exactly the same setup, less the RFM. What size trailer is that that you have all that orange stuffed on to? Looks like it fit just right! Is that th P/U you pulled it with in the driveway?

 

[KiotiJohn]

Congratulations Jeff. Now you've gone and done it! I was hoping the one new CK20 with cup holder that I saw was just a fluke, a mistake, and that not everyone was really getting cup holders! Now my delusions are ruined. I'm just going to have to order the replacement part. /forums/images/graemlins/laugh.gif /forums/images/graemlins/grin.gif

</font><font color="blue" class="small">( What size trailer is that that you have all that orange stuffed on to? Looks like it fit just right! )</font>
Looks a little small to me! To be just right, to me, would mean there's a little room open at the front and back. That way, the tractor can be moved forward/back for optimum placement and ride.
Looks like it must be a 14'.
John