CK30 Throttle

[Steve_Miller]

Can someone point me to the thread/comments a while back about tightening the throttle lever, mines starting to ease its way off quite often now.

Thanks
Steve

 

[RedRocker]

I removed the return spring on mine, the spring at the engine seems to be all you need to do the job. I never could get mine to stay anywhere near 2K or higher. Works like a champ now.

 

[VictorW]

If you look under the dash on the righht side, unfortunately not in an easy location. you will see a shaft with two nuts on the bottom of it. That is the throttle shaft and the adjustment. It's very hard to get two wrenches in there. I had a few choice words when adjusting mine. The first will adjust tension and the second is used as a jam nut.