CK3510 HST will not move

[rfdumas]

Thank You All for the in depth help. It is going back to Kioti as soon as they can pick it up. I think something let go between the motor and the HST unit. Again Thank You all for such a good response.

 

[iflyhooks]

I have a newer Kioti CK3510se hst and when I went to move it today it moved about 10 feet back and quit moving. I have checked fluid levels (all good). I have checked external equipment and it works (bucket and rear and grapel). When I try to move it nothing. The gear lever has been moved in all three selections and still nothing. No noise no nothing. Tractor starts and runs very good with no noise but just no movement. No extra noise when selecting forward or reverse.

Retested the tractor this morning and using the below comments these are the results:

With the lever in linked mode, the tractors RPM's increase when the forward or reverse pedal are depressed. The mode selector on the left moves through all the selected ranges ( h,n,m,n,l) and "feels" correct as per my hand. The linkage below looks correct and rotates with the movement of the lever. You can feel the different detents as you change modes. There are no additional noises as say the hydraulics going into a dead head situation. The forward bucket and rear lift arms work correctly. The PTO shaft does not turn when selected.

Hello, did you find out what the problem was with your ck3510? I also have a ck3510 with the exact same problem as you describe. It was delivered to the dealer a week ago.