CLEVIS Question

   / CLEVIS Question #1  

Thumper & Buttercup

Gold Member
Joined
Dec 7, 2008
Messages
464
Location
North Dakota
Tractor
NH T2220
Hey Guys,

Did your tractor come with the Clevis on it or not. I'm looking at the IPB and they want $100 for the Clevis only. I think it should have come on the tractor.
 
   / CLEVIS Question #2  
Clevis? You mean the the horseshoe thingy with the two holes that a pin goes through?
nice to have on the draw bar?

Then no, a tractor dealer shouldn't have to include one.

And they shouldn't cost $100. Try garage sales, flea markets.

What is IPB?
 
   / CLEVIS Question
  • Thread Starter
#3  
Hey Steve,

Tractor came with the draw bar, but the extra piece of metal that the draw bar pin goes through is not on the tractor, the IPB (Military for Illustrated Parts Breakdown...Sorry) lists the clevis at $100. I think it should have come from the factory with it in place, just checking if anyone else got the clevis in place with a new tractor.
 
   / CLEVIS Question #4  
I don't think I ever saw a tractor sold with a clevis as part of the tractor. If you have a Tractor supply Store nearby you can get one for a lot less than $100. Do you need a straight clevis or a twisted clevis?
 
   / CLEVIS Question
  • Thread Starter
#5  
Hey Greenmtns,

I'll do some measuring and check out TSC, I've gotten a few tractors in my life but they were all mostly older than me:D. Time to look around.
 
   / CLEVIS Question #6  
but the extra piece of metal that the draw bar pin goes through
I'm still confused, you mean one of these ?

shackleCM.jpg
 
   / CLEVIS Question #8  
Oh, OK. Pics help tremendously.

No, the plain bar is all you get. They want 100 bucks for #11 ?, that's nuts. Is it JD green ?
 
   / CLEVIS Question #9  
Mine, new , came with #10 but not #11 .
#10 promply looked like a pretzel after one trip in the woods
 
   / CLEVIS Question #10  
Mine, new , came with #10 but not #11 .
#10 promply looked like a pretzel after one trip in the woods

My Ford 2120 and New Holland both came with #10 but not #11. Never had a need for one.

In 20 plus years on 2120 and 6 on TN I have never deformed #10 in the slightest. How could you deform it? I would think you would rip the tractor mounting portion off first. My pieces are so solid that I'm not sure my machines could deform them.

Andy
 

Tractor & Equipment Auctions

2012 WESTERN STAR 4900 SB (A50854)
2012 WESTERN STAR...
2015 WACKER NEUSON LIGHT PLANT (A50854)
2015 WACKER NEUSON...
2010 L3 GENERATOR SET (A51222)
2010 L3 GENERATOR...
MAXUM M-1000 TRIPLEX PUMP POWERED BY 3412 CATERPILLAR ENGINE (A50854)
MAXUM M-1000...
1997 TRAILMOBILE 48X96 FLATBED TRAILER (A50854)
1997 TRAILMOBILE...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A49461)
2019 Allmand...
 
Top