Clutch Noise

   / Clutch Noise #1  

Bob Ha

Silver Member
Joined
Jul 31, 2009
Messages
215
Location
DFW, TX
Tractor
NH TN75, Kubota M9960, Kubota M7040, NH T4.85
A few weeks ago I was doing a lot of dirt work (fel) and I started hearing some noise. It wasn't very loud but kind of a stretching type noise. I finally figured out it was when I was depressing the clutch and seemed to more noticeable in reverse. I'll adjust the clutch this weekend but was wondering if anyone knew what it might be and if adjustment might help? The clutch works as it should be making noise. thanks, Bob

2003 NH TN75
 
   / Clutch Noise #2  
. . .a stretching type noise.

Bob, have you been watching me exercise? My stretching noises are awful.:rolleyes::laughing:

Seriously, by "stretching noise" do you mean like a spring sometimes makes as it is expanded? Is it possible your clutch return spring is setting up a harmonic vibration? Since the clutch always operates in the same direction for forward and reverse, if the sound changes when the direction changes, then it would seem to eliminate the clutch. However, if the sound only happens when the clutch is depressed, it might be from the thrust bearing. Not sure. . .:confused:
 
   / Clutch Noise #3  
Bob,

Did you mean "screeching" noise , such as metal rubbing against metal, or your finger nails against the blackboard? When clutch is pushed all the way then the fingers on pressure plate touch the release bearing. If the bearing is running dry that might cause some screeching noise.

JC,
 

Tractor & Equipment Auctions

2017 Chevrolet Tahoe SUV (A51694)
2017 Chevrolet...
2017 Ford F-650 Stakebody Flatbed Truck (A53422)
2017 Ford F-650...
Ford Tractor (A50120)
Ford Tractor (A50120)
2016 Ford F-550 4x4 12FT Landscape Dump Truck (A51692)
2016 Ford F-550...
1998 WABA Van Trailer (A53117)
1998 WABA Van...
PALLET OF SCAFFOLDING (APPROX. 18 PC) (A52706)
PALLET OF...
 
Top