Clutch Problem

   / Clutch Problem #1  

DanSullivan

New member
Joined
Feb 21, 2013
Messages
1
Location
Fayetteville, TN
Tractor
JD 2755
I have an '88 JD 2755 with synchro trans and manual clutch. Shaft does not stop completely when clutch is depressed. I must go to low idle and select gear 4/8 before selecting range, or it will grind before engaging range. Gear 4/8 is the only gear that will engage without grinding. Clutch pedal free travel is adjusted to 1 inch. Anything else I can do before separating housing?
 
   / Clutch Problem #2  
If you have plenty of engagement distance where the clutch grabs and then your pedal free travels on up toward you AND it's an adjustable clutch,I'd adjust it to engage more near the top of its travel.
If it's a hydraulic clutch,bleed it thoroughly. don-ohio :)^)
 
   / Clutch Problem #3  
Okay,Dan....any news? don-ohio :)^)
 

Tractor & Equipment Auctions

2021 JOHN DEERE HX14 LOT NUMBER 14 (A53084)
2021 JOHN DEERE...
1999-2010 Ford Pickup Truck Bed (A52377)
1999-2010 Ford...
2018 FORREST RIVER CRUISE LITE CAMPER (A52472)
2018 FORREST RIVER...
2013 Cadillac ATS Sedan (A53424)
2013 Cadillac ATS...
2016 Chevrolet Tahoe SUV (A52377)
2016 Chevrolet...
2008 INTERNATIONAL WORKSTAR 7400 SFA 6X4 DUMP TRUCK (A51406)
2008 INTERNATIONAL...
 
Top