Mowing clyffe

   / clyffe #1  

clyffe

New member
Joined
Feb 19, 2014
Messages
6
Location
south africa
Tractor
jd sabre 15.5hp 38"
hi, the rod on the back plate of a john deere sabre mower for the bypass valve, should it be in or out during mowing
 
   / clyffe #2  
If its like the Tuff Torque in my LT155, In to drivem out to free wheel.
 
   / clyffe #4  
It should be in to drive, out to freewheel.

Matt.
 
   / clyffe
  • Thread Starter
#5  
Hi bja105, thanks for the help. Have had trouble finding/opening my messages.I did open the tufftorq and found that the washer behind the pump that is activated by the small pin on the release lever is missing.Hence it made no difference whether mine was in or out.
 
   / clyffe
  • Thread Starter
#6  
Hi BXinNH,Thanks for your help.I did open the Tufftorq and found the washer missing that pushes the pump forward.Hence it made no difference when i operated the lever.

Clyffe
 
   / clyffe
  • Thread Starter
#7  
Hi deereeker001,greetings from sunny South Africa.

Clyffe
 

Tractor & Equipment Auctions

2013 UTILITY VS2DX 53FT DRY VAN TRAILER (A51222)
2013 UTILITY VS2DX...
2012 BIG TEX PIPE TRAILER (A50854)
2012 BIG TEX PIPE...
2019 CATERPILLAR 326FL EXCAVATOR (A51242)
2019 CATERPILLAR...
2016 FORD TRANSIT 250 VAN (A51406)
2016 FORD TRANSIT...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A49461)
2019 Allmand...
2011 Chevrolet Colorado LT Pickup Truck (A50323)
2011 Chevrolet...
 
Top