ruffdog
Super Member
- Joined
- Dec 31, 2011
- Messages
- 9,918
- Location
- southern wisconsin
- Tractor
- Bobcat Toolcat 5610G, Deere X744, Cub Cadet IH 982
My G series TC stopped, locked up, and threw a 157-21 code "rail pressure control fault". It was just above zero F and I wasn't happy how my off-road fuel was testing in the freezer this year. After the fault, it would run and drive around if you didn't work it much. I was coming up on my 500 hour fuel filter change so I went ahead and installed filter # 7023589. I also siphoned out 2 jugs of fuel and bought some at the truck stop that should be a good blend. I'm testing it now in the freezer. I do treat with PS white bottle but that is not enough.
The filter change went just like the manual told me except I did not remove the passanger seat. With the filter assy hanging from the hoses, I was able to bleed the air out before clamping it up. It actually was quite easy to do. We have 2 snow storms coming so I will be able to test it then.
The filter change went just like the manual told me except I did not remove the passanger seat. With the filter assy hanging from the hoses, I was able to bleed the air out before clamping it up. It actually was quite easy to do. We have 2 snow storms coming so I will be able to test it then.
Last edited: