Comparing a Kioti CK 2610 vs a couple other options and price

[Mark in GA]

I have found a used CK2610 manual trans at a dealer a few hours away. It has 21.5 hours on the meter. Not sure of the backstory on it yet, but was wondering if the $14,500 they are asking is a good price. Condition looks to be like new.

I am looking around and also found a 32HP Yanmar EX3200 HST w/ 117 hours on the meter. This one is an individual asking $12,995.

I have also considered a refurbished 28 HP Yanmar 2420D PowerShift from Fredrick痴 Outdoors w/ new Koyker 125 loader for $12,194.

Which of these sounds like the best deal? I want to be able to run a 5 ft brush cutter at my hunting club. We have mostly mixed forest bottoms and planted pines so I will need something maneuverable for cutting shooting lanes and roads vs just cutting open fields with it.

Thanks,
Mark in GA

 

[Beeenvenue]

Bought my 3510 SE with hydrostatic for 20,500 in April (north Texas, 3 dealers within $200). Quotes $1800 less for non-SE so a brand new 3510 would have been $18,700 including hydro and 30% more HP. Sounds a little steep to me I would see if they could negotiate at all.

 

[Pennview79]

Hmm. New to the kioti section of this forum. I just got a price for a ck2610 hst tlb for 22,425. Is that high or fair?

 

[Valkyrie Rider]

Hmm. New to the kioti section of this forum. I just got a price for a ck2610 hst tlb for 22,425. Is that high or fair?

$22,425 for a new CK2610 HST tractor with loader and backhoe is a steal! The typical price on that is $27-28k

 

[Pennview79]

Ok thank you. Was wondering if I was getting a good deal.

 

[Mark in GA]

I ended up pulling the trigger on the Yanmar EX3200. Got the tractor, loader, palate forks, a heavy duty box blade for $12,000. Sold the box blade for $525 and put that towards a great condition lightly used Bush Hog brand BH15 5 ft medium duty rotary cutter (rated to cut up to 2” material) w/ a slip clutch.

Mark in GA

 

[atsah]

I ended up pulling the trigger on the Yanmar EX3200. Got the tractor, loader, palate forks, a heavy duty box blade for $12,000. Sold the box blade for $525 and put that towards a great condition lightly used Bush Hog brand BH15 5 ft medium duty rotary cutter (rated to cut up to 2” material) w/ a slip clutch.

Mark in GA

Sounds good to me... Good luck with it..