Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
I am wanting to know if using the TC40 hydrotransmission to pull an implement, such as a 10 ft. disc, will cause damage to the transmission or overheat the fluid.
constant pull
- Thread starter Anonymous Poster
- Start date
- Views: 679
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
A 10' tandem disc will probably overload the TC40D. Actually, t would probably be too much for a TC40 gear drive as well. The hydro will not pull as much as a similarly powered gear drive tractor.
Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,552
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
If you have sandy soil you may be able to do it but it is a lot of disk to pull. I use a 10' with a TN 65 and my soil is heavy with some clay and it works the tractor. I could probally pull a 12' if everything was nice and dry but if I find a wet spot with the 12' I would have to lift it and avoid it or get stuck going thru. Best bet would be to find a 8' transport disc as the old rule of thumb was 5-6 hp per foot of disc.
