Branson Bob
Platinum Member
You have good taste in tractors!
Convince me not to buy a Branson 4720CH w/ FEL
- Thread starter Warsign
- Start date
- Views: 24523
You have good taste in tractors!
OP
Warsign
Bronze Member
I test drove my machine at the dealer today, everything appears in order. Delivery date is this Friday at 3pm, I know what I am doing this weekend.
OverandOut
Member
I wanted to look at them but the nearest dealer to me is almost 4hrs away. If you're like me I took delivery of my LS 2 wks ago along with a Hardee MR1442 boom mower, I stayed on the tractor for 4hrs straight only stopped cause I needed drink and a sandwich lol
Branson Bob
Platinum Member
cscollin
New member
I bought a used Kubota 15 years ago. Every joint on the 3 point hitch was worn out. It was a good example to take the time to take it apart and apply grease to the pins and joints every once and awhile. When you get your new Branson you will notice every joint is dry on the 3 point hitch. When I got my 3725H I took a few hours to take it apart and lube it up. You might want to do the same? Take care of it and it will treat you well. Enjoy your new tractor pal.
ptsg
Super Member
Ditto!
I did the exact same thing to my tractor. Specially since they are kept under the weather at the dealer. I did pretty much every joint I could find on the tractor. Even the slider for the seat and the hood hinges and latch.
