Correct 3 point hitch operation

   / Correct 3 point hitch operation #1  

blaux61

New member
Joined
May 20, 2013
Messages
12
Location
Ohio
Tractor
MF20
I have a 1974 mf 20 industrial. I am not sure if the 3 point hitch controls are working correctly. Hitch moves up and down with the draft control. Can get it to hold in a spot if I dial in the lever but it is a pain in the butt. The position control doesn't seem to do anything. I am not 100% sure how this system works or if it is working the way it was intended. Fresh oil and filter and had the inside rebuilt. Thanks for any help.
 

Tractor & Equipment Auctions

2025 K0720 UNUSED Metal Farm Driveway Gate Set (A53117)
2025 K0720 UNUSED...
Tandem Axle Rear Truck Frame (A51692)
Tandem Axle Rear...
2012 VANGUARD 53FT DRY VAN TRAILER (A53426)
2012 VANGUARD 53FT...
2014 International DuraStar 4300 4x4 Terex BT3063 63FT 15 Ton Crane Truck (A51691)
2014 International...
2005 CHEVROLET EXPRESS CARGO VAN (A53426)
2005 CHEVROLET...
2018 SkyJack SJ1056TH 4x4 Rough Terrain Telehandler (A52377)
2018 SkyJack...
 
Top