CT. SOURCE FOR SPROCKET HUBS

[WALT]

I am finishing up a teardown & refurb of an old Harley TR-35 60" power rake.
All was going well. I was remounting the sprockets/hubs in the gear box, when the center hub split as the sprocket was tightened to it. The hub fits on a 1 3/8" shaft and holds a 15 tooth, #60 pitch roller chain sprocket.

Any help in locating a vendor in Northern CT. or Western Ma. is appreciated.
The local Harley rake dealer does not stock them, and will have to order.

Thanks:

WALT

 

[banjodunn]

G'day don't know about over there but here our local bearing supply shop usually keeps a large range of sprockets and such


Jon

 

[WALT]

The story has a happy ending. I was able to locate the sprocket hub and have the ol' rake operational.
For any one in the area, I located them at Bay State Bearing, 138 Reed Ave. West Hartford, CT. I had got the two main pillow block bearings for the bottom bar roller from them in May when I started the project, for $65 per bearing, when the dealer quoted $279 per bearing, and they likely would have ordered them from the same source. They are good folks with fair pricing for the occasional tractor customer like us.

WALT