Cub 700 Series Owners Manual

[brokenknee]

Here is a link to a copy of the owners manual for 700 series cub tractors.

I looked to see if this was copyright copy. I did not see were it stated that, so I assume it would be a free copy you would have got when you purchased the tractor new from the dealer.

I will leave this up for awhile, not sure how long. It depends on how much space I end up using in my dropbox account.

Mods, if this is a copyright infringement please take down.

http://dl.dropbox.com/u/25809725/Cub 7305/Copy of Owners Manual.pdf

 

[scoutcub]

Assume you mean 7000 series? Can you list which 7000 series models, there were 2 separate "families"......

thanks!

 

[brokenknee]

Assume you mean 7000 series? Can you list which 7000 series models, there were 2 separate "families"......

thanks!

Yes it is the 7000 series, Models listed are 7260, 7265, 7300 and 7305. The file is quite large 9.08 mb. 139 pages.

Here is a copy of the cover.

 

[brokenknee]

Assume you mean 7000 series? Can you list which 7000 series models, there were 2 separate "families"......

thanks!

I also have this manual. It is 323 pages and the file is pretty big.



I have no affiliation with either company that is listed on the cover. Not sure about copyright material, I will look at it further to try to determine if it is. If not I would be willing to make it available for a short time.

 

[gordyy]

hey mine has resembled that knee a couple 3 times now not a fun thing
hope yours is healing up a lot better than mine has

 

[brokenknee]

hey mine has resembled that knee a couple 3 times now not a fun thing
hope yours is healing up a lot better than mine has

I did it about 3 or 4 years ago, it is all healed up. I ended up with a plate and 7 or 8 screws in it. I fell off a ladder while building an office space out in my shed. The fall wasn't that far, but I pulled some 2X8s down on top of me with one hitting my knee just right (or wrong) and it took out my lower tibia plateau.

When people ask me how it is, I tell them it is better than new. They look at me funny and then I add that I can now predict the weather. :laughing:

 

[gordyy]

isn't the weather thing true
the way I felt last night and this morning We are going to get hit big time tonight and tomorrow
I was hoping the snow would blow over us and head your way.
I am just west of the line they drew as to where the heavy crap is coming tonight and its on the west side
time to go out take the BB and loader off and put on the snowblower again LOL

 

[brokenknee]

isn't the weather thing true
the way I felt last night and this morning We are going to get hit big time tonight and tomorrow
I was hoping the snow would blow over us and head your way.
I am just west of the line they drew as to where the heavy crap is coming tonight and its on the west side
time to go out take the BB and loader off and put on the snowblower again LOL

I believe they said 4" where I am at now in northern MN. Will be driving back home tomorrow in it were it should only be rain. I don't mind winter so much, but is the middle of April. If I do get snow at my place still haven't taken the blower off, was going to do it last weekend but ran out of time.

 

[gordyy]

we got 12 inches here on friday and saturday blew snow friday late when it quit about 8" on the ground then, not too bad of going.
then Saturday morning went out again at 6 to anouther 4" or so was 22 blew great then it warmed up to the mid 30s and this wet stuff turned to soup would push into a big pile in front of the blower then slog in a huge chunk with the feed auger break a bolt do it all over again finally took the blower off and put the loader on to finish. It would push in a slab 15' long in front of the loader bucket without filling the bucket some terrible crap to move LOL
and its snowing right now another winter storm warning LOL