Cub Cadet 1238 with Briggs and Stratton 12HP

   / Cub Cadet 1238 with Briggs and Stratton 12HP #1  

rhogan1953

New member
Joined
Oct 8, 2007
Messages
1
i replaced the starter ...but forget where the red wire and black wire attach from the starter to the mower..does the red go to the selinoid?..if so where does the black attach??..thanks
 
   / Cub Cadet 1238 with Briggs and Stratton 12HP #2  
Not sure about that particular model, buy standard convention in DC electrical systems is red to be hot (the solenoid in this case) and black should go to ground (the chassis). Was there a screw that you took off the frame somewhere near there? If I remember correctly on my old 1450 it ran down to the frame. Hope this helps.
 

Tractor & Equipment Auctions

23018 (A53424)
23018 (A53424)
2012 FRAC TANK (A53843)
2012 FRAC TANK...
2006 GAYLEAN  130BBL VACUUM TRAILER (A53843)
2006 GAYLEAN...
Ditch Witch 6510A Trencher - Deutz Diesel, Backhoe, Cable Plow, Front Blade (A53473)
Ditch Witch 6510A...
Ammco Brake Machine (A53424)
Ammco Brake...
1997 CMC S102 END DUMP TRAILER (A53843)
1997 CMC S102 END...
 
Top