I removed the mule drive and all the sheetmetal from my CC 682 tractor to be painted. My question is on the front pulley part of the mule drive there are 3 sets of holes where the long part of the mule frame that goes over the deck can bolt to. I did not pay close attention when I took it apart, and after repainting it I forgot which set of holes to use, but am almost sure it was in the very front (towards front of tractor) set and some marks left in the metal indicate this. But, all picures I see of 682's show it in the second set of holes just beind the ones in front, and my parts diagram shows it bolts to the ones furthest back down near the end of the pulley frame. Question is can anyone tell me which set is the right one for 682 with 44C mower deck? Thanks for any help!
-Fordlords-
-Fordlords-