Tiller Cultivator Shank Adjustment

   / Cultivator Shank Adjustment #1  

Wayne_Freeman

Gold Member
Joined
Apr 12, 2004
Messages
261
Location
Beaufort, SC
Tractor
Kubota L3400
This is my third year using the Agri Supply Kelvinator 3 PT KEULAVATOR FRAME - Agri Supply in our garden . The problem I am having is one of my cultivator shanks continously kicks up. CULTIVATOR SHANK TO FIT INTERNATIONAL - Agri Supply The spring has a nut on top where you can increase the tension that I assume increases the kickback load? I have the spring almost totally compressed by tightening the screw but yet the kickback occurs constantly? The same shank on the other side works great and is not nearly as tight. I am not sure at this point how to try and resolve this? Any help is reatly appreciated!
 
   / Cultivator Shank Adjustment #2  
Agri supply sells some good but cheap quality stuff. I would contact them and tell them that you have a proble since the beginning and you have adjusted over the years but its not right. I think you have figured it out. I think maybe your bad side has a bum spring. since the other side works fine.
 
 

Tractor & Equipment Auctions

2004 CATERPILLAR 140H MOTORGRADER (A51406)
2004 CATERPILLAR...
2015 Toro Z Master Professional 64in Zero Turn Mower (A50322)
2015 Toro Z Master...
New Holland 451 Sickle Bar Mower (A50515)
New Holland 451...
2020 Cat 299D3XE Skidloader (RIDE AND DRIVE) (A50774)
2020 Cat 299D3XE...
2015 FONTAINE VELOCITY 102" X 48' STEP DECK TRL (A50459)
2015 FONTAINE...
Takeuchi Skid Steer (A49461)
Takeuchi Skid...
 
Top