skyhook
Veteran Member
- Joined
- Mar 12, 2013
- Messages
- 1,906
- Location
- Canada Ontario
- Tractor
- 1996 Kubota L4200 GSTC,(sold) 1994 JCB 210S 4x4x4
You could put a hose clamp on it,tighten it as much as you can,
then use a chisel and hammer where the screwdriver goes in.
Give a few good blows to loosen it up.
then use a chisel and hammer where the screwdriver goes in.
Give a few good blows to loosen it up.
