David Bradley Clutch disc.

[pipefitter]

Anyone know where I can locate them? I recently bought a couple of these. I mostly bought them for the sickle bar mower to use around my property. The clutch disc is in pretty worn condition, and I'd like to replace them if possible. BTW, I tried the search, but couldn't find anything.

 

[plumberroy]

There is a Facebook group for David Bradley's there are 2 groups look for the one that has David Bradley tractors chainsaws in the name . These are the guys from the old Yahoo groups David bradley group . I used to be active in it . They know their stuff on Bradley's. I haven't had a Bradley for about 15 years. But I seem to remember some where buying sheet material and cutting out the clutch friction disc

 

[pipefitter]

Thanks! I joined them and there is a man in TX that was reproducing them. Looking into it.

 

[plumberroy]

Thanks! I joined them and there is a man in TX that was reproducing them. Looking into it.

Happy I could help. Great bunch of guys there . I have had several Bradley tractors over the years. I remember back in the days of dial up internet settings st the computer talking about David Bradley's on Wednesday evening. We did some serious getting tractors around back then . I bought a 97 in central Ohio to get the tiller with it . I kept the tiller and traded the tractor for a reel mower. That tractor was in Mass. With in a month ,Kevin Shaw who is still active on the Facebook group got it. I know of tractors being relayed from show to show to get them half way across the country

 

[pipefitter]

I bought one to primarily for the sickle bar mower. It was missing the pulley, belt, engine not running, etc. I found another local who had a load of stuff. I ended up buying another tractor, (less an engine), hood, fuel tank clutch friction disc, adjusting nut, and some assorted other stuff. I'm planning on using a HF engine at first, then trying to find the correct Continental engine, but I'm not looking to restore it. I think I saw Kevin Shaw's name on there. He may have even replied to my question. Thanks again.