DEERE 2032R FENDER EXTENSION OPTION

   / DEERE 2032R FENDER EXTENSION OPTION #1  

BACARDI-151

New member
Joined
Jul 18, 2009
Messages
12
Location
Pembroke NH
Tractor
2015 and 2020 John Deere 2032R
Hi all,
I recently purchased a 2015 Deere 2032R with turf tires. As compared to my old 2210 the rear tires are huge. There is a lot of tire sticking past the fenders. I got a pretty good mud bath doing some work in a wet area (got it stuck in mud). So, I figured the fender extensions they offer as an option would offer some tire spray protection. I ordered a set at my local dealer. They were pretty expensive at a little over $200 dollars. They came in last Friday. When I opened the box, I felt totally ripped off. Deere generally makes pretty good stuff and quite honestly I expected more. I got serious buys remorse. They are just a strip of cheap plastic. They offer virtually no protection whatsoever. They are a 4 inch wide piece of plastic and about 8 pop rivets. They only offer about 1.5 in of extra tire coverage. Totally not what I expected for $200. I did not install them, I took them back. Luckily my dealer agreed with some negotiating to take them back and waive the 25% re stocking fee. Beware of this option, Its not what you would expect from Deere for $200. Photo attachedView attachment 422637View attachment 422637
 

Attachments

  • fenders.jpg
    fenders.jpg
    1,010.1 KB · Views: 1,321
   / DEERE 2032R FENDER EXTENSION OPTION #2  
I agree. Worse, they simply bolt on top of the fender. Unfortunately in most of the sales literature JD always shows a photo of the nice "under the fender" extensions like those used on the 3-series tractors. Those look like they were actually designed for the tractor. The 2-series extensions on the other hand look more like a one-size-fits-all product that you'd get from J.C. Whitney.
 
   / DEERE 2032R FENDER EXTENSION OPTION
  • Thread Starter
#3  
I agree. Worse, they simply bolt on top of the fender. Unfortunately in most of the sales literature JD always shows a photo of the nice "under the fender" extensions like those used on the 3-series tractors. Those look like they were actually designed for the tractor. The 2-series extensions on the other hand look more like a one-size-fits-all product that you'd get from J.C. Whitney.

They don't even bolt on, They pop rivet on under the fender.
 

Tractor & Equipment Auctions

JOHN DEERE 8R 280 (A53084)
JOHN DEERE 8R 280...
UNUSED KIVEL 3500# PALLET FORKS (A51248)
UNUSED KIVEL 3500#...
JOHN DEERE XUV835M LOT NUMBER 26 (A53084)
JOHN DEERE XUV835M...
2001 Dodge Ram Wagon 3500 Passenger Van (A51692)
2001 Dodge Ram...
UNUSED HURRICANE 40' CONTAINER (A51248)
UNUSED HURRICANE...
BAUMA LIGHT TX 12 LOT NUMBER 240 (A53084)
BAUMA LIGHT TX 12...
 
Top