Deere 210C TLB bucket removal

[GSSFC]

Deere 210C TLB

I am going to look at a 210C TLB tomorrow. I would like to use this machine for pallet fork work. I am curious how the front bucket connects and how feasible it is to remove the bucket and attach a set of pallet forks. Obviously this would need to be a quick process and not require pulling pins or be labor intensive.

Thanks. Tim

 

[jenkinsph]

Deere offered a Quick Hitch for the loader on this model but most of these didn't have it. You would be advised to check with a Deere Yellow dealer to find out if it is an option you can get added to the specific tractor.

Here is a link to the 210C specifications from Deere, note on pg 53 the option for the Quick Coupler.

http://www.deere.com/en_US/cfd/cons...non_current_pdfs/noncurrent_backhoes/210C.pdf

 

[Johndeere3720]

I think that Deere would have a different QA system for their yellow machines. With the 210, i would say either SS QA or Loader QA.

 

[beenthere]

Johndeere3720
Thanks.
You are right. I'll delete that mistake.

 

[Johndeere3720]

Johndeere3720
Thanks.
You are right. I'll delete that mistake.

your welcome.

 

[GSSFC]

Thanks for the responses. I looked today it did not have a QA for the bucket.

I am seriously considering buying this. Deere says it weighs 10,500 with the loader, backhoe, cab and 4x4. That seems WAAAYYY light to me. Anyone actually weigh one?

Thanks, Tim

 

[mojust84]

GSSFC did you ever get that 210c? just wondering because i just bought one today and thought we may be able to share advice.