Diagram for correct placement of hydraulic hose

[sjmedin]

Does anyone have a diagram of correct placement on hoses on a Kubota L853 loader mounted on
a Kubota L4330 tractor with cab

 

[nyone]

Did you cross some lines on a valve or something? If so you can look at the valve pattern and connect it to the proper cylinder.

 

[LD1]

Which hoses? There are alot of them and they arent exactly labeled. You just have to trace them from one point to the next.

IF you could clarify what exactly you have going on, and which hoses specifically you are questioning, and possibly include some pictures, Im sure we could be a lot more help

 

[sjmedin]

I need to know which hoses are pressure and which are return. Removed hoses and can't get
loader to function properly after replacing them.

 

[sjmedin]

Did you cross some lines on a valve or something? If so you can look at the valve pattern and connect it to the proper cylinder.

Yes, I don't know which is pressure and which is return on valve body. Tried to attach another hydraulic ram to it but
did not work and loader would only raise to a limited height, connected hoses back and loader functioned properly. doesn't
make any sense.

 

[zzvyb6]

Sounds like they were full of air. Full cycle lift & curl several times.

 

[LD1]

What "other ram" did you try and attach?

Are you attempting to install a 3rd function?

How many hoses hook to the loader valve. 6' or 7