satoh470
New member
is type n oil OK for diesels??
diesel oil
- Thread starter satoh470
- Start date
- Views: 1818
mguitas
Super Member
- Joined
- Aug 22, 2011
- Messages
- 8,080
- Location
- Schuylkill County Pennsylvania
- Tractor
- Massey Ferguson 1423 Hydrostat
:welcome:
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 16,336
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
Try this...Types of Motor Oil
Fossil Farm
Platinum Member
Here are a couple more.
www.motorexbih.com/API-SAE Engine Oil Service.pdf
API Classification - Lukoil
www.motorexbih.com/API-SAE Engine Oil Service.pdf
API Classification - Lukoil
Jimbrown
Veteran Member
I have never heard of type N motor oil and I can not google up any hits for it. What are you calling type N oil?
Briana03
Elite Member
Welcome to TractorByNet!
We moved your thread to the Oil, Fuel, & Lubricants forum.
We moved your thread to the Oil, Fuel, & Lubricants forum.
two4spooky
Bronze Member
By "n" do you mean API SN classification? Some tractors, such as Kubota's until around 2011 or so, only require the older API CF classification. Many newer brands/weights of passenger car motor oils(PCMO) marked API Sx(x=L,M or N) will qualify for the older diesel classification CF. Even though the PCMO qualify they are not usually marked with the older CF designation. So technically you could use them in place of a CF oil. I would not use a API SN oil in place of the CF qualified HDEO though, unless it was just for topping off or an emergency. Too many good HDEO are available at reasonable prices and available pretty much everywhere. So if I understood your question correctly: You can but it would not be ideal. I would shorten the oil change interval if doing so.
